A rod intended to work at medium and long distances fishing on lakes, reservoirs, small rivers and canals. A lightweight rod with a moderate-fast action that can work with very light hooklengths without the use of feeder gum. A highly balanced blank capable of delivering VERY ACCURATE casts with 50-60-70 grams feeders + feed to distances of up to 65 meters. Overload and work with heavier feeders of 80-90 grams + feed at distances of 25-35 meters is also possible, allowing the rod to be used on slow-flowing rivers. This rod can also be very successfully used for long-distance casts with light flat feeders weighing 40-50 grams.
Three-piece rod with an unusual cut – in the butt section there is an additional joint, which makes it possible to achieve a blank with all the advantages of a two-piece rod. Transportation is possible both in a two-piece version and in a fully disassembled state.
A very important feature is the ability of the rod to damp spurts of trophy fish when playing on a very light hooklength without the use of feeder gum.
For the balance of the tackle and comfortable work, on this rod I have made a handle of sufficient length – 450 mm, with a rear grip diameter of 26 mm. Medium-sized reels such as Daiwa 4000 by English numeration (old sizing), or a Daiwa 6000 LT concept would be ideal for this rod. The rod is equipped with a reliable 16-size Fuji TVS screw down reel seat that securely locks the reel foot. The butt ring is 25 mm in size for good braid and line flow and to prevent rod wobbling when winding in the braid.
The rod is supplied with shorter 600 mm quivertips. The 2 and 2.5 oz quivertips have 4.5 mm guides; while the 1.5 oz quivertip comes fitted with 4 mm guides – such decrease is deliberately made to reduce fluctuation of the soft thin quivertip after casting (reduced parasitic oscillations lower the risk of breakage of the quivertip).